With the attachment on, Meiji Hohoemi RakuRaku Milk can be fed directly from the can.
*Use Pigeon’s Bonyu Jikkan nipple and cap.
*Pigeon’s Bonyu Jikkan products are sold separately.
How to use the attachment
It is straightforward to use RakuRaku Milk’s dedicated attachment. Simply mount the assembled Bonyu Jikkan to it.
Before use
- Cleanliness
- Wash your hands well with liquid or bar soap.
- Safety
- Attachments and nipples should be cleaned with household dishwashing detergent and then disinfected by boiling, steaming or chemical solution.
- For details about sterilizing the attachment, nipple, cap, and hood, refer to Pigeon’s Bonyu Jikkan Nursing Bottle instruction manual.
Things
to have ready
How to use the attachment
It is straightforward to use RakuRaku Milk’s dedicated attachment. Simply mount the assembled Bonyu Jikkan to it.
To feed
After feeding
Attach the nipple to the cap and cover it with the hood.
**For details, Refer to Pigeon’s Bonyu Jikkan Nursing Bottle instruction manual.
Put the attachment on.
Open a can of Meiji Hohoemi Milk.
Push the assembled nipple, cap, and attachment straight down into the opening of the can.
To avoid toppling the can, place the can on a flat surface and hold it securely.
Now, check if:
the attachment is securely and horizontally attached, and
the attachment does not come off when you push it up lightly, as shown in the illustration.
Remove the hood while holding the attachment securely and feed your baby.
1. Remove the attachment by pushing it up lightly.
2. Dismantle the feeding component.
3. Soak the nipple, cap, hood, and attachment in warm water immediately after use. Then wash and store them.
